Wastewater Management for an Industry

Working in a wastewater management industry comes with a lot of risks and responsibilities. You have to abide by your local and national legislators’ laws and make sure the wastewater being treated is done in an orderly fashion.

Globally, about 56% of all wastewater gets treated safely. In chemical industries, it takes special consideration and measures. Here are a few tips on wastewater management for the smooth functioning of your industry.

1. Standard safety

Proper maintenance of your machinery and equipment is essential here. In case of any equipment failure, not only will this be a hazard to your employees but will also hamper the production processes.

Instead of thinking that your maintenance staff is repairmen, you should think of them as people who prevent any need for repairs. This is why you must conduct thorough checks beforehand to see if there is no faulty machinery.

All the pipes and electrical systems have to be labeled properly and the inlet and outlet pipes must be clearly distinguished. In places where there are open pits, make sure there are proper railings so that no employee falls and gets injured.

2. Flow measurement

Industrial workers must be familiar with the concept of wastewater flow and its measurements. This includes keeping a check on how much water flows into a facility and what are the pollutants present in the wastewater.

You can make use of mass balances to see how the process is done and what is the concentration of the various pollutants. This will help in determining the optimal performance of your system.

Flow rate measurement is arguably one of the most important criteria that you and your team need to take care of so that you can calculate the total capacity of the treatment system. Any upset in the measurements will indicate that there is a compliance problem.

3. Tour groups

No matter how much you wish otherwise, there will be various tour groups or surveys made by different organizations to check your systems. This includes visits from agencies that are probably not the least bit familiar with wastewater management but need to do a check anyway.

So will you deal with these tour groups? You should assign multiple hard-working employees who will take the group on a proper tour and explain the workings of each machine.

When any outside contractor is performing a function or an inspector is doing a check, make sure your team stands there to answer any questions. Keep visitors away from pits and hazardous equipment unless they are experienced enough.

4. Influent systems

When you have been working in the industry for a long time, you will know the materials that produce the waste systems in the first place. Review these procedures and see how these chemicals or materials are combined together to make up the wastewater streams.

For secure wastewater applications, check out Elpro Technologies. Elpro delivers reliable and safe methods of wastewater communication and treatment for industrial plants.

You don’t need any kind of wires or cables to set up the instruments and the entire system is robust and strong. Elpro technologies have been used extensively by the municipal industries for many decades, so you know they will always provide the best.

5. Hazards

The vats and open systems in your plants obviously don’t smell very good and aren’t safe too. Unfortunately, there is always a possibility that someone might fall in or some chemical might spill out.

These potential hazards need to be taken care of as soon as possible. To take preventive measures, install non-slip surfaces around these pits and on all the catwalks. You can even use additional traction tape if you want.

All the employees should use slip-resistant footwear and proper uniforms while working. If someone falls into a vat, make sure there are remedies to immediately rescue that person. Rescue hooks and floatation devices are a must here. Personal hygiene is also a requirement.

Over to you…

Wastewater management for your industry might be tough and time-consuming but it’s very important nevertheless. No matter which field your industry belongs to, you have to keep a check on the wastewater so that the environment is not harmed. Take measures to make sure the wastewater is disposed of safely in an area where no animals or humans live nearby. Also, see to it that your team uses eco-friendly methods to make a minimal impact on the environment.